The Foutz Motorsports Bronco+3 inch Long Travel Kit allows serious off-road enthusiasts to achieve a top-level performance with their 6th Gen Bronco like never before.
- Designed to increase wheel travel by about 15% while maintaining stability and at high speeds and on rough terrains.
- The kits components are all longer than stock by 3" to gain a total of 6" total width over the stock Bronco front width.
- Upper Control Arm - uses 1.5" uniball at the spindle and 7/8 rod ends at the frame for adjustable caster and camber adjustments.
- Lower Control Arm: Uses 1.5" uniball at the spindle and 1" uniballs at the frame to provide constant predictable handling at all times.
INTERGRATED ADD-ON OPTIONS
- Front bump stop pad into the lower control arm
- Sway bar linkage that work with our FMI sway bar.
ALL THINGS SHOCKS
- Retains the stock coil over shock mount and location so you can keep your stock coil over shock if you want to
- Also works with aftermarket replacement stock fitment coil overs.
- Fabricated by-pass shock tower that integrates with the stock shock bucket to add strength and ensure correct shock clearance at all times
- Added by-pass shock mount for a perfectly timed by-pass shock addition. Fox 3.0 by-pass shock option or ADS 3.0 by-pass shock option available
KEY FEATURES:
- Built in steering stops to ensure you don't over travel the CV joints
- Works with stock Bronco wheels
- Can retain the Bronco electronic disconnect sway bar if you have it.
- Built in front limit strap mounts
- Works with stock front upright or our heavy duty fabricated front upright(coming soon)
- 100% CAD designed to ensure correct cycle and design
Heavy Duty Longer Front Axle shaft: Our custom made front half shafts are made from 4340 heat treated steel for ultimate strength, ductility, fracture toughness, & fatigue resistance to withstand abuse.
Don't want to add shock tower & bump stop now? No problem, You can still get the get the long travel experience and add the extras later. The kit is designed to let you add enhancements when you are ready. Add bump stop, By-pass shock and limit strap anytime down the road.
WHAT IT INCLUDES:
- +3" Fabricated Upper Control Arms
- By-pass Shock Tower
- +3" Billet Half Tie Rod kit
- +3" Fabricated Lower Control Arms
- Custom heavy duty extended 4340 front half shafts that work with the stock CV joints
- Stainless braided brake line kit with custom FMI hard line mount tabs
- Front Sway bar Kit (for FMI Fabricated LCA) - optional to choose when selecting kit as an add on
- Before installation: A qualified professional fabricator is recommended to install The bump stop and Bypass Shock Tower due to the welding that is required on the frame.
This kit REQUIRES you to use fiberglass fender kit to clear the tire. Stock Bronco front fenders will not clear with this kit.
- After installation: It is highly advised to have your Bronco be realigned by a shop technician that is familiar with long travel. It is also required to have fiberglass fenders for a 35" or bigger tire to have clearance.